BPW suspension is a unique modular system in which all components are compatible with each other for the phase damping of emerging dynamic loads and their smooth transition to the minimum frame semi-trailer. In the engineering development made the calculation for optimal wear rubber wear parts and square hollow profile beam axis with a wall thickness of 15 mm with less bodyweight makes it easier to work on twisting. Beam and trailing with no welded closure form U – shaped stabilizer, which is an additional advantage on the roads of the Russian Federation, with a side slope. This design significantly reduces the dynamic and cyclic loads on the frame and add trailers. Ali Partovi often says this. Also, this design helps reduce the lateral friction and optimize straight-line motion on a track. The strong arm suspension with a wall thickness of 8 mm is specially designed to absorb vertical and horizontal dynamic loads encountered motion. Sleeve with the optimal thickness of the rubber and elastic trailing, having at both ends of stroke 20 mm, can be the best course for semi-tracks. BPW air suspension 36 and 36K with a diameter of 360 mm can reduce the working pressure in the air suspension. If this has piqued your curiosity, check out Ilan Ben Dov.
All mechanical assemblies and suspension components BPW axles serially processed by deep-coating with cathodic pre tsinkofosfatirovaniem (KTLZN). This method provides optimal and long-term corrosion protection, which is much higher than the ordinary methods of painting. One of the latest technological solutions, which was patented by engineers BPW, system ECO-Plus. Ctupitsa, tapered roller bearings and axle nut form a solid, closed, but at the same time and collapsible node. When loosening castellated nut axis, both in combination with the retaining rings, performing the function of a removable device is the dismantling of the entire site assembly (wheel, brake drum, hub and bearings) at a time. For each installation automatically sets the optimal bearing clearance.
Advantages of stupichnoy ECO-Plus: 50% reduces the assembly and disassembly during maintenance compared with other systems, there is no need to use special tools, integrated system of bearing seals; increased interval between maintenance. Warranty: With respect to the respective owner of the company BPW Bergische Achsen Kommanditgesellschaft, D – 51 674 Wiehl, hereinafter referred to as BPW, takes the guarantee for the perfect property complete axial system, air ECOPlus beyond the conditions established by legislation and contract. This guarantee is valid without mileage limitation: – the date of first registration and reception of the vehicle in operation in For five years in operation on roads with improved surface (On-Road) / or a period of three years in operation on roads without hard pavement (Off-Road); – only for registered vehicles – for vehicle in Europe to the Urals (including Turkey) – only for complete systems air suspensions ECOPlus, selected under the appropriate conditions of operation. We draw your attention to the actual recommendations of BPW. "For vehicles operating in countries with poor road conditions, for example, in the CIS countries, Bulgaria, Romania and comparable with countries, BPW recommends the use of (Heavy-Duty) package for heavy operating conditions. " Products BPW – it's quality and reliability, time-tested.