Stretch ceilings are made of special vinyl film that is stretched on a plastic frame. This frame may be visible or hidden. There are many types of performance outside of the stretch ceilings, such as suede or imitation marble, lacquered or matte, as well as different color schemes. Plus, the suspended ceilings have many advantages, here are a few: – If the suspended ceilings are dirty, they easy to wash with plain water – When the long operation such ceilings are not cracked or damaged by the blows – stretch ceilings rather heat-resistant, they prekrastno retain their properties at a temperature of -5 to +50 degrees; – Because the ceilings are made of special vinyl, they meet all international standards for fire safety, when ignited, they do not burn or melt – If the case of a leak ceiling, suspended ceilings maintain approximately 100 liters of water per 1 square meter. And after the removal of this water blamed himself restores the tension. Water is removed fairly easily, it is necessary to open a hole for a lamp, but if the built-in ceiling lamps are not available, you should call a specialist from the company that installed your ceiling, arriving specialist otognet only one angle and to empty, then set the angle back – Thanks to the plasticity Vinyl, suspended ceilings can be installed in absolutely all areas in different planes, making different slopes, in general, everything that you please – In addition to all manufacturers, such ceilings give ten-year warranty. How is the mounting tension ceilings? Quite simply, workers measure the space in which to install suspended ceilings, and then to get the size of manufactured Vinyl with a skeleton.
Once you are ready to be mounted on the perimeter of a room attached plastic frame, which will consolidate itself Vinyl. The frame is fixed at 5 cm below the ceiling. Next Vinyl is attached to the frame at the corners, with special clips. After that, the room is heated by means of special equipment. When the room is heated ceiling installation begins. After installing the film air in the room quietly cools and the film tension ceiling stretched itself. Width of the vinyl film is usually equal to 1.4 m, because this will be the joints, but these joints are welded, as will be seen only very thin line, in place of the joint, but if it was used matte, this joint is generally not noticeable. Because the suspended ceilings have good fire resistance they can mount any light with incandescent bulbs to 60 watts and halogen lamps to 35 Tues Sami lamps fixed on the main ceiling, and stretch ceilings under the lights drilled holes into which dress ring. That is why tension ceilings are the most inexpensive, beautiful scenery and convenient method of any premises.