Attica drainage and heat insulation of three easy, peeling out of the drain body in the thermal insulation and thus saves approximately one hour already profiled insulation body Assembly time. The lower wedge plate on the roof structure is aligned in the first step, which also serves as a positioning aid for the height of the Attica penetration. The vapor barrier, such as the flexible SitTurbo Dampfsperrplatte is flex, attached to the attic, followed by the second step. Now the lower wedge and the dam body before the recess, the gully inserted and mechanically fixed. To compensate for the slope of the rectangular drain tube to achieve a flat surface a counter wedge is the Kit. He is the final waterproofing membrane as usual moved and in the wrong-fixed flange design can be fixed. With the installation of gravel catch, the construction is complete.
One meter long and 600 mm wide the SitTurbo forms a 10 cm high, rectangular heat insulation construction, dam body of easily in the thermal insulation of the roof can be incorporated. At higher thermal barrier coatings, the structure can be increased by building-side backing of thermal insulation. With its rectangular design, the dam body can be use not only quickly, but also safe. Thermal bridges are avoided. Unused roof surfaces is the kit from non-flammable mineral fibre WLG 040 used. The more robust material variant polyurethane WLG 030, which is characterized by a very high pressure according to DIN 4108-10 is advisable for shared roof surfaces. Get more information at or contact SITA under the telephone number + 49 (0) 2522 8340-0 contact: SITA bauelemente GmbH Ferdinand-Brown-str. 1 D-33378 Rheda-Wiedenbruck phone: + 49 (0) 2522 8340-0 fax: + 49 (0) 2522 8340-100 E-Mail: Internet: